The plastic shed base above is the best one i could find and as i have found out, more than up to the task of supporting your shed and everything you plan to put in it and best of all its simple to assemble.. Time and time again we’ve discussed the many options available when it comes to building a shed base.we’ve gone through the pros, the cons, the aesthetically pleasing, the permanent and the portable, but we’ve never given a definitive answer on which product we consider to be best.. A timber shed base, or portabase, is made from pressure-treated timber and comes with metal spikes which are hammered into the ground to keep the shed base in place. these can be installed on a level lawn or the frame can be placed onto a patio using the metal l-shaped legs (supplied with the kit) to help keep it level..
A1basekit or pressure-treated frame. the a1basekit is a wooden frame made from pressure-treated timber. it is made to the precise size of the shed floor, and is pegged into the ground and levelled. this is a great way of achieving a level base, allowing maximum airflow to keep the underside of the shed floor dry.. A newbie here with a question. i'm building a shed base that will be approx 8'x8' and will be made with pressure treated 2x6's 16" on center.it will be supported on cement piers on the corners and middle.. Hi, the best way would be a concrete slab base and the cheapest way if the ground your putting the shed onto is reasonably level would be to lay pressure treated bearers across the joists of the shed base.these can be levelled by using any sort of slabs you might have lying around or pop into your local recycling centre and pick some up from.
